Philips MX975D - Manual (Page 23)

23
English
TUNER
1 Turn SOURCE SELECTOR to TUNER to select the tuner.
y
TUNER is displayed.
2 Turn TUNER PRESET X to select a preset radio station.
y PRESET , the preset number and station are displayed.
After programming radio stations, you might want to change
their sequence.
RESHUFFLE allows you to exchange the
positions of presets.
1 Choose * TUNER from the menu and press NEXT 2.
2 Choose
RESHUFFLE and press NEXT 2.
y PRESET , a preset number and station are displayed.
3 Turn TUNER PRESET X to select a preset station.
4 Press ENTER / OK to confirm the selection.
y The selected preset number SWAP <-> and a second
preset number are displayed.
5 Turn TUNER PRESET
X to select the other preset station.
6 Press ENTER / OK to confirm the exchange.
y
RESHUFFLED is displayed briefly and these two
preset numbers are swapped.
It is possible to assign a name to any of the preset radio
stations.
1 Choose * TUNER from the menu and press NEXT 2.
2 Choose
GIVE NAME and press NEXT 2.
y A preset radio station is displayed.
3 Turn TUNER PRESET X to select the preset to be renamed.
4 Press ENTER / OK to confirm your selection.
y The existing name or
________ is displayed.
5 Turn TUNER PRESET
X to select a letter and NEXT 2 or
1 PREV. to move to the next or previous position.
6 After you have entered the entire name, press ENTER / OK
to confirm.
y
STORED is displayed and the name is stored.
1 Use the menu option
* TUNER, choose GIVE NAME.
y A preset radio station is displayed.
2 Turn X MENU NAVIGATOR to select the name to be
cleared.
3 Press ENTER / OK to confirm your selection.
4 Press
1 PREV. while the first letter is flashing.
y
CL is flashing to the left of the station name.
5 Press ENTER / OK to clear the station name.
Or, if you have changed your mind,
press
1 PREV. to leave the station name as it is.
Clearing station names
Naming radio stations
Resorting stored radio stations
Tuning to stored radio stations