Philips DA1000 - Manual (Page 15)

15
English
Helpful Hints :
– If no station is found during autoscan, the display will
return to or SELECT, Manual tune. Select
Manual tune to tune to a specific frequency.
indicates maximum reception during tuning.
indicates minimum reception during tuning.
Manual tune
1 Push left/right SELECT 1/2 once or more until you stop
in the desired frequency.
2 Press ENTER to confirm.
In FM mode
Manual tune
1 Push left/right SELECT 1/2 once or more until you stop
in the desired frequency.
2 Press ENTER to confirm.
SELECTING A STATION
In DAB mode
After your radio has been tuned, you can select a station using the navigator control.
1 Push left/right SELECT 1/ 2 once or more to scroll the list of stored stations.
2 When your desired station appears, press ENTER to select the station.
™ After successful tuning, the display shows the selected station name, scrolling text,
volume, battery level, clock, preset EQ and signal reception strength.
Helpful Hints :
– If tuning fails, the display shows No stations available
and goes to the screen or SELECT, Manual tune.
– Select Manual tune by pressing ENTER.
™ A list of stored stations appears.
– Push left/right SELECT 1/ 2 to go to a new station, and press ENTER.
™ Display shows the signal reception strength:
indicates maximum reception during tuning.
indicates minimum reception during tuning.
Features
VOLUME
ENTER
INFO PRESET
AB
FM
VOLUME
SELECT
VOLUME
DA1000/00-ENG 3/15/04 8:59 AM Page 15