Pride Mobility GC Controller INFMANU3355 - Manual (Page 11)

Basic Operation Instructions 11
www.pridemobility.com GC Controller
2 1
4
3
Joystick Control
The joystick controls the driving speed and direction of the power chair.
When the joystick is at rest, it is in the neutral (center) position, and the chair
is stationary. In order to drive the chair, the joystick must be taken out of
neutral. Moving the joystick in any direction will switch the chair from
neutral to drive, and the chair will move in the direction indicated by
joystick position. The farther away from the neutral position the joystick is,
the faster the chair will move in that direction. To stop chair movement,
simply release the joystick or move it back to the neutral position. The
chair’s electromagnetic brakes will engage after the chair has come to a
controlled stop.
OPERATING THE GC CONTROLLER
The GC controller is used to operate your power chair and all of its
components.
The GC Controller system consists of (see figure 2):
1. joystick
2. control panel
3. joystick module
4. power module
Figure 2. GC Controller