Pyramid Car Audio CDR-36DX - Manual (Page 4)

Page 07 Page 02
FM AM
RADIO OPERATIONS
CD OPERATIONS
BAND
Press BND button (10) to change bands as
below:
SELECT STATION
Rotate TUNING knob (11) clockwise or
anticlockwise to adjust the frequency
upward or downward.
LOCAL/DISTANT
Press the LOC/RPT button (12) to select
between local setting for reception of strong
station and distant setting for reception of
weak station when tuning.
MONO/STEREO
In FM band, press MON/INT button (13)
to select mono or stereo reception for radio
stations. You can sometimes improve
reception of distant stations by selecting
mono operation.
DISC PLAY
Gently insert a CD with the label side facing
up into the Disc Slot (16). The CD is then
automatically loaded into the unit and starts
playing with the first track of the disc. The
digital display will indicate the track number
and the time of the track.
EJECT
Press Eject button (15) to stop CD
playback and eject CD from slot. Receiver
switches to radio operation.
PAUSE CD
Press Play/Pause button (14) to
temporarily stop the playback. Press it again
to resume playback.
SKIP TRACKS
Press Track Forward button (17) or
Track Reverse button (18) to choose the
following track or the previous track. Track
numbers show on display.
FAST FORWARD/FAST REVERSE
Hold Track Forward button (17) or
Track Reverse button (18) for several
seconds to fast forward or fast reverse.
Releasing the button to stop fast forward
and fast reverse playback.
REPEAT
Press LOC/RPT button (12) to
continuously repeat playing the current
track. Press it again to cancel the function.
INTRO:
PREVIEW ALL TRACKS
Press MON/INT button (13) to play first
several seconds for each track. Press it again
to stop intro and back to normal playback.
RANDOM:
RANDOM TRACKS PLAYBACK
Press and hold LOU/RDM button (8) for
several seconds to play all tracks in the
random order. Press it again to cancel the
function.
DIN FRONT-MOUNT (Method A)
1
3
2
(Fig. 1)
30
Choose the mounting location where the unit will not interfere with the normal driving function
of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure it is all connected
up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized
parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other
modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the passenger if there
is a sudden stop. Like an emergency stop.
If installation angle exceeds 30° from horizontal, the unit might not give its optimum
performance.
Avoid installing the unit where it would be subject to high temperature, such as from direct
sunlight, or from hot air, form the heater, or where it would be subject to dust, dirt or excessive
vibration.
PRECAUTIONS
Installing the unit
1. Dashboard
2. Holder
After inserting the holder into the
dashboard, select the appropriate tab
according to the thickness of the
dashboard material and bend them
inwards to secure the holder in place.
3. Screw
01 INSTALLATION 04 RADIO & CD OPERATIONS