Pure Evoke-1XT - Manual (Page 5)

5
Setup options
Press the Menu button, turn the Tune knob and push to select alarm settings or one of the following setup options.
Station order
Changes the order of stations on your station list. Turn the Tune knob to scroll through the following options and push to
select one:
Alphanumeric Displays all stations in alphanumeric order.
Fav station Displays your six most listened to stations at the top of the station list and the rest below, in
alphanumeric order. Your favourite stations are displayed with a next to their names.
Active station Displays active stations at the top of the station list and inactive ones at the bottom in alphanumeric
order. Inactive stations are those on the station list but not currently available, marked with a ’?’.
Multiplex Lists stations in groups according to their multiplex. Multiplexes or ensembles are groups of stations
owned and broadcast by a single operator.
Trim stn. list Removes inactive stations from the station list.
→ presets Available only when Fav station order (above) has been selected. Transfers your favourite stations to the
six preset buttons.
Display
Brightness
To change the screen brightness turn the Tune knob to choose between Low and High and push to select one.
Standby mode
You can choose whether the backlight is on or off when your EVOKE-1 XT is in standby mode.
To change the standby mode turn the Tune knob and push to select Backlight On or Backlight Off.