Panasonic DMC-F1PP User Manual

Page 16

Preparation

Access to the card

When the card is being accessed, the
flash/access indicator

and card

access indication

lights.

When the flash/access indicator

and

the card access indication

lights;

• Do not turn off the camera.
• Do not remove the battery or pull out the

card.

• Do not disconnect the DC cable when

using the AC adaptor.

The card and the card contents may be
destroyed and the camera may not
operate normally.
As there is a risk that the data on the
card may be damaged or erased due to
the electrical noise, static electricity or
the defects of camera/card, please back
up your data on your PC using USB
connection. (P77)

SD Memory Card (supplied) and

MultiMediaCard (optional)

The SD Memory Card and
MultiMediaCard are small, lightweight,
removable external cards. The SD
Memory Card is equipped with a write
protection switch that can inhibit writing
and formatting. (When the switch is
moved towards the [LOCK] side, it is not
possible to write or delete data on the
card and format it. When the switch is
unlocked, these functions become
available.)

SD Memory Card

• RP-SDH512 (512MB)
• RP-SDH256 (256MB)
• RP-SD128BJ (128MB)
• RP-SD064B (64MB)
• RP-SD032B (32MB)
• RP-SD016B (16MB)
• RP-SD008B (8MB)

MultiMediaCard

• The reading/writing speed

of MultiMediaCards is
slower than SD cards.
When MultiMediaCards are
used, the performance of
certain features may be
slightly slower than advertised.

• After recording motion images using the

MultiMediaCard, the flash/access
indicator and the card access indication
may appear for a while, but this is not a
malfunction.

2048