Polycom SIP 3.1 User Manual
Page 118
Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 64
To set up a dual registration with Microsoft Live Communications Server 2005 as
the presence server:
1.
(Optional) Modify the sip.cfg configuration file as follows:
a
Open sip.cfg in an XML editor.
b
Locate the feature parameter.
c
For the feature.1.name = presence attribute, set
feature.1.enabled
to 1.
d
For the feature.2.name = messaging attribute, set
feature.2.enabled
to 1.
e
Locate the voIpProt parameter.
f
If SIP forking is desired, set voIpProt.SIP.ms-forking attribute to 1.
Refer to
.
g
Save the modified sip.cfg configuration file.
2.
Modify the phone1.cfg configuration file as follows:
a
Open phone1.cfg in an XML editor.
b
Locate the registration parameter.
c
Select a registration to be used for the Microsoft Live Communications
Server 2005.
Typically, this would be 2.
d
Set the reg.x.address to the LCS address.
For example, reg.2.address = "7778"
e
Set the reg.x.server.y.address to the LCS server name.
f
(Optional) Set the reg.2.server.y.transport attribute to
TCPpreferred or TLS.
Your selection depends on the LCS configuration.
g
Set reg.x.auth.userId to the phone's LCS username.
For example, reg.2.auth.userId = "jbloggs"
h
Set reg.x.auth.password to the LCS password.
For example, reg.2.auth.password = "Password2"
i
Locate the roaming_buddies attribute.
j
Set the roaming_buddies.reg element to the number corresponding
to the LCS registration.
For example, roaming_buddies.reg = 2
Refer to
on page
.
k
Locate the roaming_privacy attribute.