Philips CCC 134AT - Manual (Page 11)

Automatic Channel Setup (cont’d) 11
4
Press the F.FWD/B button or the REW(ind)/{ button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
Repeat steps 3-4 to add or delete other channels.
5
Press the STATUS/EXIT button.
Programming of the last channel you selected will appear.
3
Press the CH(annel) o o /p p buttons or the Number buttons
to select the channel you want to add or delete. The chan-
nel number will appear in the upper left corner of the screen.
• Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. You cannot delete it.
• To review the memorized channels,
follow these steps.
1) Press the COMBI button, then
press the MENU button.
2) Press the PLAY/▲ button or the
STOP/▼ button to select PRIM.
SETUP. Press the F.FWD/B button.
3) Press the PLAY/▲ button or the
STOP/▼ button to select CH MEM-
ORY REVIEW. Press the F.FWD/B
button. A list of programmed chan-
nels will appear on the screen.
4) If all the programmed channels
don’t fit on the screen, press the
F.FWD/B button. If you do not
press the F.FWD/B button within
10 seconds, the remaining channels
will appear on the screen. (If there
are no remaining channels, the pre-
vious menu will appear.) Or press
the REW(ind)/{ button to see the
previous screen of channels.
5) Press the STATUS/EXIT button
once or twice.
Helpful Hints
1
Press the COMBI button, then press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
CHANNEL.
TO ADJUST PRESS { / B
CH23
> CHANNEL
FM ANTENNA
SMARTLOCK
REVIEW
EXIT
PRIM. SETUP
SAVED
TO ADJUST PRESS { / B
CH123
> CHANNEL
FM ANTENNA
SMARTLOCK
REVIEW
EXIT
PRIM. SETUP
SAVED
POWER
EJECT
SPEED MEMORY
CABLE
/DBS COMBI
SMART
PICTURE
SLOW F ADV
SLEEP/
WAKE UP
1 2 3
4 5 6
7 8 9
0
CH. VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
VCR PLUS+
MENU STATUS
/EXIT FM CLEAR
1
1
2,4
5
3
Adding/Deleting Channels
If your channel lineup changes, you may want to add newly avail-
able channels or remove channels that are no longer available in
your area. You can use the CH(annel) o/p buttons to scroll
through only the available channels. To add or delete channels
from the TV/VCR’s memory, follow these steps.
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
PRESS B