Philips AJ3138 - Manual (Page 13)

5 Set the alarm timer
You can set two separate alarms. For the alarm tone, you can select the
buzz, the FM radio, or a piece of recorded sound.
1
Make sure that you have set the clock correctly.
2
Press / .
» or is displayed.
3
Press set/scan.
» The hour digits begin to blink.
4
Press +/- to set the hour.
5
Press set/scan to confirm.
» The minute digits begin to blink.
6
Repeat steps 3-5 to set the minute.
7
Repeat steps 3-5 to select whether to ring alarm for the whole
week, on weekdays, or at weekend.
8
Repeat steps 3-5 to select an alarm source: buzzer, radio, or
recorded sound.
» The apparatus turns on automatically at the set time and rings
with buzz or radio or recorded sound.
Tip
• You can also press and hold / to start alarm setting.
• The gentle wake-up function is designed for buzzer/radio source only.
• To adjust volume for the radio source, exit the alarm mode first.