Valet mode, Panic mode – Python 1401 User Manual

Page 21

➢

Valet mode

You can prevent your system from automatically activating the Failsafe® Starter

Kill. When the system is in Valet mode, the feature is disabled. The doors

do not automatically lock. This is useful when washing or having the vehicle

serviced.

To enter or exit valet mode with the Control button:

1. Turn the ignition key on and then off.

2. At anytime during the next 10 seconds, press and

release the Control button on the Control Center.

The LED turns on solid when you enter Valet®

Mode, and turns off when exit Valet Mode.

To enter or exit Valet mode with the remote control:

Press

two times, and then to set the system in Valet Mode. Repeat the

process to take the system out of Valet Mode.

The Control Center LED turns on solid when in Valet Mode and turns off when

exiting Valet Mode. The optional horn honk does not activate when locking

and unlocking in Valet Mode.

➢

Panic Mode

If you are threatened in or near your vehicle, you can attract attention by trig-

gering the system with your remote. This feature is only available if the optional

horn honk is connected.

Press

•

for 2 seconds, to enter Panic Mode. The horn honks and the

parking lights flash for 30 seconds.

To stop Panic Mode at any time:

•

Press on the remote again.