PYLE Audio PLVWR70IR - Manual (Page 6)

6
MONITOR
1. & 2. (POWER) and POWER INDICATOR LIGHT
When the unit is provided DC 12V power, press POWER button (1) to turn on
the unit. And then the power indicator light (2) will be illuminated red. Press it
again to turn it off.
3. CAR DOME LAMP
The two car dome lamps (3) will be on in some needed situations.
4. LIGHT SWITCH
There are three settings for the car dome lamp operation: (OFF), (AUTO),
and (ON), refer to light switch (4).
A. To turn off the lamp.
B. To make the lamp turned on only when car doors are opened.
C. To turn on the lamp.
6. SPEAKER VOLUME CONTROL KNOB
Slide the switch (6) left or right to increase or decrease the volume level of the
speakers on the base of the unit. When slide the switch in the direction of
volume decreasing to the end, it will turn off the speakers.
7. BRIGHT ( )
Rotate the bright knob (7) clockwise or counter-clockwise to increase or
decrease the screen brightness.
8. CONTRAST ( )
Rotate the contrast knob (8) clockwise or counter-clockwise to increase or
decrease the contrast lever of the screen display.
9. COLOR ( )
Rotate the color knob (9) clockwise or counter-clockwise to increase or
decrease the color level of the screen display.
10. TFT LIQUID CRYSTAL DISPLAY
The 7-inch color TFT LCD (10) can show the current state of the unit.
11. EARPHONE VOLUME CONTROL KNOB
Slide the knob (11) will change the volume of the earphone.
12. JACKS FOR EARPHONE
There are two jacks (12) for earphone. You can connect PLVH2 of the jacks to
receive sound signal.