Philips HD4651 - Manual (Page 8)

C
6 Press the On (l) /Off (O) button ON (l).
The Kettle starts heating up and the Pilot Light will illuminate.
C
7 You can interrupt the boiling process by pressing the
On (l) /Off (O) button OFF (O).
C
8 The appliance switches off automatically and a bell signals
when the water reaches the boiling point.
9 Remove the Kettle from base to pour.
• If Kettle is used often, steam condensation may collect in small
amounts in the Kettle base.
• Avoid handling areas of the Kettle which may become hot or emit
steam while Kettle is operating.
• Do not clean or store Kettle until it has cooled.
Cleaning the Appliance
1 Switch Kettle OFF (O).Then unplug the base of the appliance
from electrical outlet.
2 Clean the outside of the appliance with a cloth moistened
with warm soapy water, or a non-abrasive cleaner.
Do not use any abrasive cleaning cleansers, scourers, etc. to clean
the appliance.
Never immerse the Kettle or its base in water.
4