beautypg.com

Connections, Step 3: connecting tv – Philips 78 User Manual

Page 8

background image

English

8239 300 32892

8

Connections

Step 3: Connecting TV

3

2

1

OOFER

MW

MW

3

2

1

OOFER

IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV.
– Connect the DVD system directly
to the TV.

Using Composite Video jack

1

Use the supplied composite video cable
(yellow) to connect the DVD system’s
VIDEO OUT jack to the video input
jack (or labelled as A / V In, Video In,
CVBS, Composite or Baseband) on the
TV.

2

To hear the TV channels through this
DVD system, use the supplied audio
cables (white /red) to connect AUDIO
IN-TV
jacks to the corresponding
AUDIO OUT jacks on the TV.

3

Set the P-SCAN switch to ‘OFF’.

IMPORTANT!
The progressive scan video quality is
only possible when using Y Pb/Cb Pr/Cr,
and a progressive scan TV is required.

Using Component Video jack
(Y Pb/Cb Pr/Cr)

1

Use a component video cables (red /blue /
green - not supplied) to connect the
DVD system’s Y Pb/Cb Pr/Cr jacks to
the corresponding Component video
input jacks (or labelled as Pr Pb Y or
YUV) on the TV.

2

To hear the TV channels through this
DVD system, use the supplied audio
cables (white/red) to connect AUDIO
IN-TV
jacks to the corresponding
AUDIO OUT jacks on the TV.

3

If you are using a Progressive Scan TV
(TV must indicate Progressive Scan or
ProScan capability), set the P-SCAN
switch to ‘ON’. Otherwise, set it to ‘OFF’.

Helpful Hint:
– You have to power off the DVD system or
switch to standby mode before changing the
P-SCAN switch setting.

Option 1

Option 2

001-035-MX2500D-78-Eng2

7/20/04, 3:11 PM

8