Panasonic DMC-FZ3PP - Manual (Page 32)

Recording pictures (basic)
32
∫ Program AE
The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
• Insert the charged battery. (P15)
• Insert the card. (P16)
• Remove the lens cap.
1 1 Turn the camera on.
2 Set the mode dial to program
AE mode [ ].
• The power indicator (green) lights.
When it blinks, the remaining battery
power is low. Insert a fully charged
battery.
2 Aim the AF area 1 to the point
you want to focus and then press
the shutter button halfway.
• A: Press the shutter button halfway to
focus.
• The focus indication 2 is lit and then
the aperture value 3 and the shutter
speed 4 are displayed.
3 Take a picture.
• B: Press the shutter button fully to take
the picture.
OFF ON
M S
A
SCN
P
1/25 F2.8
When the
subject is not
focused When the
subject is
focused
Focus
indication Blink (green) On (green)
AF area Turns from
white to red Turns from
white to green
Sound Beeps 4 times Beeps 2 times
1/25 F2.8
FZ3-PP.book 32 ページ ２００４年６月２１日 月曜日 午後７時６分