Philips 1055D - Manual (Page 16)

16
English
Manual tuning
1 Press TUNER to select tuner mode.
➜ After two seconds, the display will show the current
waveband and frequency.
2 To switch between FM and AM waveband, press TUNER
again.
3 Press FREQUENCY
4 or 3 (or а / б on the remote
control) repeatedly to change the frequency. The frequency
changes in 100kHz steps in FM and 10kHz steps in AM
waveband.
Automatic tuning
1 Press TUNER to select tuner mode.
2 To switch between FM and AM waveband, press TUNER
again.
3 Press and hold FREQUENCY
4 or 3 for more than one
second to activate auto tuning mode.
➜ When a station is reached, auto tuning stops.
● Repeat steps 2–3 to search for other radio stations.
Tuning to a weak FM station
1 Press FREQUENCY
4 or 3 repeatedly to tune in the
weak FM station manually.
2 Press FM MODE
(Ç) to switch to monaural mode. This
should reduce the noise and make the station easier to
hear.
Preset Radio Stations
When a preset station is selected, the preset number will
appear shortly and the display will show the waveband and
frequency.
Storing Preset Radio Stations
You can store up to 20 stations in the FM waveband and 20
stations in the AM waveband in the memory.
1 In tuner mode, press TUNER
to switch between FM and
AM waveband.
2 Press FREQUENCY
4 or 3 to tune in the desired
station.
3 Press and hold PRESETS until the “PRESET” icon flashes.
4 Press
( / ) (or numeric keys 0-9 on the remote control)
to select the desired preset channel number to store.
5 Press PRESETS again to store the radio station.
● Repeat steps 2–5 to store other preset radio stations.
Selecting Preset Radio Stations
1 In tuner mode, press TUNER
to switch between FM and
AM waveband.
2 Press PRESETS, then FREQUENCY
4 or 3 (or ( / )
on the remote control) to select the desired preset station.
● You can also use the remote control’s numeric keys.
Tuner
T
UNER