PYLE Audio PLVWR71IR - Manual (Page 2)

OSD ADJUSTMENT
1. Press the POWER ON/OFF button on the monitor or remote unit to turn on the power.
a.Touch power switch on the monitor to select video for 2 inputs.
b.Press power switch on the monitor 2 second to turn off the monitor
2. Press MENU button on the monitor or remote unit to active the OSD function show on the
LCD screen and press again to select the adjustment item as below.
BRIGHTNESS
CONTRAST
COLOR
U/D NORM/REV (NORMAL/REVERSE)
R/L NORM/REV (NORM/REVERSE)
RST RESET
3. Press UP/DOWN button on the monitor or remote unit to increase or decrease the value of
the adjustment functions for optimum viewing.
REMOTE CONTROL UNIT
POWER on/off
Press this button to change mode of the screen picture.
a.16 : 9 wide mode
b.4 : 3 full mode
VIDEO SELECT
MIRROR
Press this button to reverse the picture horizontally. (LEFT TO RIGHT)
MENU
Up/down
FEATURES ON SCREEN DISPLAY CONTROL
ON SCREEN DISPLAY CONTROL
2 VIDEO INPUTS
16: 9 WIDE SCREEN TFT-LCD PANEL
SUPER BRIGHT TFT-LCD PANEL
4. WIRE CONNECTION
Red wire: + ve
Black wire: - ve
Violet wire: none
Yellow RCA Jack: Video 1
White RCA Jack: Video 2
5. ACCESSORIES
EXTENSION MINIDIN CABLE 1PC
REMOTE CONTROL UNIT 1 PC
VIDEO CABLE 1 PC
MOUNTING PLATE 1 PC
7 TFT LCD Roof-mount Monitor
Power on /off
Color
Contrast
Volume
Brightness
Mute
Mode
Up/down
Left/right
Video 1 /video 2
SPECIFICATIONS:
DISPLAY 7 WIDE SCREEN TFT-LCD
BACK LIGHT BUILT IN CCFT
DOT FORMAT 1440 x 480
DOT PITCH 0.107(H) x 0.732(V)
VIEWING ANGLE L /R/T/B 5 5/55/15/35
COLOR FIGURATION STRIPE
BRIGHTNESS RATING 3 70 c d/m
CONTRAST RADIO 1 50:1
NUMBER OF PIXELS " 6 91, 2 00"
VIDEO INPUT LEVEL C OMPOSITE 1 .0V P -P/75 O HMS
VIDEO INPUT SYSTEMS NTSC/PAL AUTO SWITCHING
POWER SOURCE DC 12V +/- 15%
POWER CONSUMPTION 700Ma (max) / 10w (max)
OPERATION TEMPERATURE - 20 C elcius t o + 7 5 C elcius
STORAGE TEMPERATURE - 30 C elcius t o + 8 5 C elcius
DIMENSIONS 200 (W) x166(H) x38 (D) mm
NET WEIGHT 0 .8 K GS