Palsonic 6158 User Manual

Page 15

3. SLEEP timer

Using the SLEEP button allows you to have the appliance automatically turned off after a preset
time (the time range will be as long as 120 minutes) , and set the appliance to standby mode. At
every press of the button the setting time will be decreased by 30 minutes.
When the remaining time is 5 minutes left, it will be displayed once every 2 minutes for
4 seconds

When the SLEEP timer is functioning, if you press SLEEP button again, the TV will display the
remaining time. If the power is switched off, the SLEEP timer will be cancelled. You must set it
again if wanted.

4. TV/AV selection

Press the TV/AV button on the set or AV button on the remote controller to select TV or AV
mode.
When the TV is working at RF receiving mode, press AV button the set will be switched to
AV1, the screen displays AV1 and colour system; Press the button again and the set will be
switched to AV2, the screen displays AV2 and colour system. Press the button once more, the set
will be switched to TV mode and the screen displays current TV channel.

SLEEP OFF

SLEEP 120

SLEEP 30

Press SLEEP

AUTO

PAL

PAL(RF/VIDEO)

NTSC 3.58 (VIDEO)

PAL(RF/VIDEO)

PAL-60(RF/VIDEO)

4.43MHz

50Hz

3.58MHz

60Hz

50Hz

4.43MHz

60 Hz

N358

NTSC3.58 (VIDEO)

3.58MHz

N443

NTSC4.43(VIDEO)

4.43MHz

COLOR SYSTEM

COLOR

SUB-CARRIER

VERTICAL

FREQUENCY

60 Hz