Pass Labs XA100 User Manual
Page 9
9
XA100 Owner’s Manual
All figures obtained after 1 hour warm-up, with regulated 120 VAC
power line. See manual notes about AC power line regulation.
Gain
26 dB
Freq. Response
-3 dB at 1.5 Hz, -3 dB at 100 kHz
Power Output
100 watts max @ 1% THD,
1 kHz, 8 ohms
Maximum Output Voltage
plus, minus approx. 40 volts
Maximum Output Current
plus, minus approx. 5 amps
Input Impedance
22 kohm balanced
11 kohm unbalanced
Damping factor
30 ref @ 8 ohms nominal
Slew rate
plus, minus 50 V/uS
Output Noise
300 uV unweighted 20-20 kHz
Balanced CMRR
approx. -60 dB @ 1 kHz
DC offset
< 100 mv
Power Consumption
approx. 300 watts
Temperature
25 degrees C. above ambient at idle
Dimensions
19 “ W x 9” H x 22” D
Shipping Weight
68 lbs.
For more information please contact:
Pass Laboratories Inc.
P.O. Box 219,
24449 Foresthill Rd.,
Foresthill, CA 95631
Tel: 530.367.3690
Fax: 530.369.2193
www.passlabs.com
© 2006, Pass Laboratories Inc.
XA100 Specifications
“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”,
“Aleph”, and “Zen” and are all registered trademarks of Pass
Laboratories, Inc., and all rights thereto are protected by law.