Precision Power D500/1 - Manual (Page 4)

FEATURES
Advanced Instrumentation Input Stage.
24dB/Octave; HP/LP/FULL; 30-4kHz Crossover.
Independent Line Output Crossover 30-4kHz
PWM Power Supply
Triple Darlington Output Stage.
AP-IV Protection Circuity
QBASS TM Bass Boost
High Voltage Input Capability with -12dB Attenuation Switch.
Gold Plated RCA Input and Output Connectors.
PowerLock TM Speaker and Power Wire Connectors.
WHAT’S INCLUDED
Amplifier (with speaker and power plugs mounted)
(4) Mounting screws and washers
2mm hex wrench
2.5mm hex wrench
3mm hex wrench
CEA SPECIFICATIONS
3
DD550000//11
Power Output: 125 Watts RMS x 1 at 4 ohms and < 1% THD+N
Signal to Noise Ratio: -70 dBA (reference 1 Watt into 4 ohms)
Additional Power Output: 270 Watts RMS x 1 at 1 ohm at 14.4 Supply<1% THD+N
DD11000000//11
Power Output: 185 Watts RMS x 1 at 4 ohms and < 1% THD+N
Signal to Noise Ratio: -68 dBA (reference 1 Watt into 4 ohms)
Additional Power Output: 495 Watts RMS x 1 at 1 ohm at 14.4 Supply<1% THD+N
DD22000000//11
Power Output: 375 Watts RMS x 1 at 4 ohms and < 1% THD+N
Signal to Noise Ratio: -71 dBA (reference 1 Watt into 4 ohms)
Additional Power Output: 1150 Watts RMS x 1 at 1 ohm at 14.4 Supply<1% THD+N
DD33000000//11
Power Output: 495 Watts RMS x 1 at 4 ohms and < 1% THD+N
Signal to Noise Ratio: -60 dBA (reference 1 Watt into 4 ohms)
Additional Power Output: 1475 Watts RMS x 1 at 1 ohm at 14.4 Supply<1% THD+N