Panasonic DMC-FX38 - Manual (Page 89)

89
VQT1S07
Connecting to other equipment
Connecting to other equipment Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
• You can easily print out or mail the pictures you have imported. Use of the
“ PHOTOfunSTUDIO-viewer- ” bundled software on the CD-ROM (supplied) is a convenient
way of doing this.
• Read the separate operating instructions for the supplied software for more information about
the software in the CD-ROM (supplied) and how to install it.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Connect the camera to a PC via the USB connection cable A
(supplied).
• Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
A USB connection cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
C AC adaptor (DMW-AC5G; optional)
• Use a battery with sufficient battery power or the AC adaptor (DMW-AC5G; optional). If the
remaining battery power becomes low while the camera and the PC are communicating, the
status indicator blinks and the alarm beeps.
Refer to “ Disconnecting the USB connection cable safely ” (P90) before disconnecting the USB
connection cable. Otherwise, data may be destroyed.
1
DC IN
AV
OUT/
DIGIT
AL
COMPONENT
OUT
DMC-FX38GN-VQT1S07_eng.book 89 ページ ２００８年７月７日 月曜日 午後８時４２分