Peavey GT - Manual (Page 28)

GT Master Section (cont'd)
L&R Mono Assignment Switches
Assign the Left and Right signals to the Mono output..
L/R/Mono Matrix Post Switches
Switches the Left, Right and Mono matrix signals between pre
and post fader.
L/R/Mono PFL Switches
Allow for Pre-Fader Listening of the Left, Right and Mono
signals respectively.
L/R/Mono Peak & Signal LED’s
The red LED indicates that the signal is within 3dB of the clip-
ping point. The green LED constantly displays the level of sig-
nal activity by varying in intensity.
L/R/Mono Faders
Adjust final output signal level of Right, Left and Mono out-
puts.
Rear Connections
Matrix Out (A&B)
These two connectors deliver a balanced signal from the asso-
ciated matrix master.
Mono Out
This connector delivers a balanced post-fader signal containing
all signals assigned to the Mono Clean Bus.
Right Out
This connector delivers a balanced post-fader signal containing
all signals assigned to the right output.
Left Out
This connector delivers a balanced post-fader signal containing
all signals assigned to the left output.
Matrix Insert (A&B)
This jack allows for the insertion of an effect or signal proces-
sor into the audio path of the associated matrix.
Mono Insert
This jack allows for the insertion of a signal processor into the
path of the mono sub-mix.
Right Insert
This jack allows for the insertion of an effect or signal proces-
sor into the audio path of the right sub-mix.
Left Insert
This jack allows for the insertion of an effect or signal proces-
sor into the audio path of the left sub-mix.
Monitor Out (R&L)
These two connectors deliver a balanced signal from the left
and right local monitor.
Aux 1-8 Out
These eight connections provide the balanced output signals
from their respective auxiliary buses.
Ext. Talkback Out
This connector provides an external balanced signal from the
selected talkback source.
Ext. Talkback In
This connector accepts a balanced signal which is assignable to
any of the locations in the talkback system.
Stereo Program In
This jack accepts an unbalanced stereo line level signal for use
as warm-up or break music.
Oscillator / Pink Noise In
This connector accepts a balanced or unbalanced signal from
an oscillator or pink noise generator. This signal is assignable
via the talkback assignment switches.
SP / TC / GT
P AGE 26
C
ENTURY
S
ERIES
LEFT INSERT RIGHT INSERT
MONO OUT
MONO INSERT
MATRIX A OUT
INSERT A
RIGHT OUT LEFT OUT
MONITOR L OUT MATRIX B OUT AUX 3 OUT AUX 1 OUT
INSERT B MONITOR R OUT AUX 4 OUT AUX 2 OUT
STR PGM IN AUX 7 OUT AUX 5 OUT
AUX 6 OUT AUX 8 OUT OSC/PINK IN
EXT TB OUT
EXT TB IN