PYLE Audio PLD175TBT User Manual

Page 10

Initial System Start-Up
Be sure to press the

button (1)

when using the unit for the first time, after
all connections are completed correctly.
1. Turn off the unit power.
2. Press

with a ballpoint pen or

similar pointed object.

Turning Power On And Off
Turn on the unit by pressing any button
(except

button (3) and

button (5)) or

inserting a disc to disc slot (4).
When system is on, press

button (2) to

turn off the unit.

Loading/Removing a Disc
1. Press

button (3) to flip down the

front panel.
2. Insert the disc into the disc slot (4) with
the printed side facing up; the player will
play the disc automatically.

Adjusting sound quality

Rota

the

button (6) or press

button (6) to adjust the volume level.

Adjusting Bass /Treble /Balance

/Fader/EQ/Loud/Subwoofer
1. Press

button (6) repeatedly to

choose the desired mode.

Press

button (36) and then press

button (29) to choose the desired

mode.

Each pressing the button changes the
modes as follows:

RESET

VOL

(+/-)

VOL

Remote control operation:

Menu

Whenever press

button (5) to eject the

disc.

Adjusting the volume level

VOL

BASS

TREB

BAL

LOUD

SUBW

Volume level:00 ~ 63
Bass level: -07 ~ +07
Treble level: -07 ~ +07
Balance: 15L ~ 15R
Fader: 15R ~ 15F
EQ: Flat, Classic, Pop, Rock
Loudness: ON/OFF

FAD

General Operation

Using The Detachable Front Panel

1.Press the Open

button (3) to flip

down the front panel.

2.Grasp the right side of the front panel,
then gently push the front panel towards
the left side before pulling it out from the
unit.

3.Store the front panel in the protective
case provided for safe keeping.

REMOVING AND PROTECTING
DETACHABLE FRONT PANEL.

FRONT PANEL

PROTECTIVE CASE

front panel

open button

The front panel of the unit may be removed
as a theft deterrent. After removing the front
panel, use the case provided to keep the front
panel from getting damaged.

TO ATTACH THE FRONT PANEL
Hold the right side of the front panel with
the plate facing down.
First attach the left side of the front panel
to the unit by inserting the hole into the left
holder.
Then slightly push it leftwards and attach
the right side hole into the right holder.
Finally push up the front panel.