Panasonic sc-pt150 User Manual

Page 30

OTHER OPERA

TIONS

ENGLISH

RQT8043

RQTX0029

Adjusting the volume of each speaker:
Speaker level adjustments

This is one of the ways to get appropriate
surround effects.

Preparation

While stopped and no on-screen display is shown

To output a test signal.

L: Front

left

C: Center

R: Front right

RS:

Right surround

LS: Left surround
•

There is no output from SW (subwoofer)
channel.

To set the volume level normally used for

listening.

To adjust the speaker level for each speaker.

•

Adjust the speaker levels to the same level
as the front speakers.

C, RS, LS: −6 dB to +6 dB

To stop the test signal
Press [TEST] again.

To adjust speaker level during play
(Effective when playing multi-channel audio or
when Dolby Pro Logic

II is on.)

1. Press and hold [–CH SELECT] to select the

speaker.

SW:

Subwoofer

• You can adjust SW only if the disc includes a

subwoofer channel.

• “SW” does not appear on the display and is

not adjustable when “

ŸPL II” is lit.

• “S” appears on the display when “MOVIE”,

“MUSIC” is selected with Super Surround
(

\ page 29).

In this case, you can adjust both surround

speaker levels at the same time using [

5, ∞].

S: −6 dB to +6 dB

2. Press [

5] (increase) or [∞] (decrease) to

adjust the speaker level for each speaker.

C, RS, LS, SW: −6 dB to +6 dB

(L, R: Only the balance is adjustable.)

• To adjust the balance of the front speakers,

while “L” or “R” is selected, press [

2, 3].

Using sound effects (continued)

RQTX0029-B10.indd 30

1/21/07 4:45:54 PM