Figure 1, Figure 2, Step 1 – ParaBody 848 User Manual

Page 5: Step 2

FIGURE 1

STEP 1:

• SECURELY assemble the one 3/8 X 2-3/4” BOLT (25), two 3/8” WASHERS (19), and one 3/8” LOCK NUT (20) to the STAND (3) as

shown in FIGURE 1.

• Assemble two 3 x 2 END CAPS (15) onto the ends of the STAND (3) as shown in FIGURE 1.

• Insert two 3 X 2” END CAP (15) into the ends of the BASE (1) as shown in FIGURE 2.

FIGURE 2

STEP 2:

3/8 X 2-3/4” 25

• Assemble one 2” SQ. END CAP (13) into the end of the STAND (3) as shown in FIGURE 1.