Planet Technology Ceiling Mount Kit ICA-6CM - Manual (Page 2)

Packet Content
ICA-6CM
Quick Installation Guide X 1
Installation
1. Dismount the ICA-651 from the wall. Please be carefully when release the last screw. If
ICA-651 fall down will damage and possible to make someone hurt.
2. Dismantle the wall mount bracket from power box.
3. You can find a screw on wall mount bracket that use to fix bracket to ICA-651 main
body. Please loose the screw from wall mount bracket.
4. Turn the wall mount bracket
to loose it from ICA-651 main
body. When you are turning the
wall mount bracket out, please
also turn the cables. If just keep
turn the wall mount bracket,
the cables will tie together
and that will make the cables
breakage or damage. You may
turn the wall mount bracket two
circles and then turn cables two
circles. Please try to do this part
carefully, until the wall mount
bracket completely released.
5.Let all the cables through the
ICA-6CM tube. Then turn the
ICA-6CM to lock on ICA-651
main body. When you turn the
ICA-6CM, please be careful the
cables tie together.
6. User the bundled screws to lock ICA-6CM to the power box.
7. Use the rubber ring, nut, and screw to mount the ICA-6CM to the ceiling.
Additional Installation
ICA-6CM has bundled a 30 cm ceiling tube. If you need the longer application, you can buy
the accessory ICA-CT50 (50 cm ceiling tube) to extend the tube length. When you use the
long distance tube, you will also need to extend the cables. Please refer to ICA-651 manual
to know the cables will transfer what kind of signal and use right cable to extend.
ICA-6CM
(includes 30cm ceiling tube)
CT-50 (50cm ceiling tube)