Setting the clock, Setting the automatic open function, Other functions – Pioneer AVH-P7500DVD User Manual

Page 92

2 Touch a to turn back-up camera setting

on.

# To turn back-up camera setting off, touch b.

3 Touch c or d to select an appropriate

setting for polarity.

Each time you touch c or d switches between

the following polarity:

! BATTERY When the polarity of the con-

nected lead is positive while the gear shift
is REVERSE (R) position

! GND When the polarity of the connected

lead is negative while the gear shift is RE-
VERSE (R) position

Setting the clock

Use these instructions to set the clock.

! When this unit is turned on, time is dis-

played on the entertainment clock only.

(Refer to Switching the background display

on page 94.)

1 Touch A.MENU and SETUP and then

touch CLOCK ADJUST.

2 Touch c or d to select the segment of

the clock display you wish to set.

Each time you touch c or d will select one

segment of the clock display:

HourMinute

As you select segments of the clock display

the segment selected will be highlighted.

3 Touch a or b to set the clock.

Each time you touch a will increase the se-

lected hour or minute. Each time you touch b

will decrease the selected hour or minute.

Notes

! You can match the clock to a time signal by

touching JUST.
If the minute is 0029, the minutes are

rounded down. (e.g., 10:18 becomes
10:00.)

If the minute is 3059, the minutes are

rounded up. (e.g., 10:36 becomes 11:00.)

! You can display the clock for eight seconds by

pressing FLIP DOWN/CLOCK when the LCD
panel is closed.

! Even when the sources are off, the clock dis-

play appears on the display.

Setting the automatic open

function

To prevent the display from hitting the shift

lever of an automatic vehicle when it is in P

(park) position, or when you do not wish the

display to open/close automatically, you can

set the automatic open function in the manual

mode.

1 Touch A.MENU and SETUP and then

touch AUTO FLAP.

2 Touch either of the following touch

panel keys to select the display to open/

close automatically or manually.

! AUTO The LCD panel will be opened or

closed automatically with the turning of the
ignition switch on or off

! MANUAL You have to press

OPEN/CLOSE to open/close the LCD
panel

Other Functions

Section