Philips PET7432 - Manual (Page 20)

21
Frequency response 20Hz-20KHz ± 1dB
Signal/noise ratio
80 dB
Audio distortion + noise
-80 (1KHz)
Channel separation
80 dB
Dynamic range
80 dB
Audio out (analog audio) Output level: 2V ± 10%
Load impedance
10 K
Video out Output level: 1Vp - p ± 20%
Load impedance
75
7 Troubleshooting
Warning
Risk of electric shock. Never remove the casing of the player. •
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using the player, check the following points before
requesting service. If the problem remains unsolved, register your player and get support
at www.philips.com/welcome.
No power
Ensure that both plugs of the mains cord are properly connected. •
Ensure that there is power at the car cigarette lighter or AC outlet. •
No sound
Ensure that the AV cable is connected correctly. •
Distorted picture
Clean the disc. With a clean, soft, lint-free cloth, wipe the disc outwards from •
the center.
Make sure that the video output format of the disc is compatible with the TV.
•
Change the video output format to match your TV or program. •
The LCD is manufactured using high precision technology. You may, however, •
see tiny black points and/or bright points(red, blue, green) that continuously
appear on the LCD. This is a normal result of the manufacturing process and
does not indicate a malfunction.
English
EN