Panasonic 6296 - Manual (Page 2)

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.
Product Leaflet Date of issue Revision / Date of revision
MEW00132 2001-10-19 9 / 2008-10-10
Type numbers
6295 Enclosed heat detector, 57 °C, class A2 S (54 to 70°C).
6296 Enclosed heat detector, 72 °C, class B S (69 to 85°C).
6297 Enclosed heat detector, 87 °C, class C S (84 to 100°C).
6298 Enclosed heat detector, 117 °C, class E S (114 to 130°C).
3390 Label holder (100 holders per packet, excl. labels).
3391 Labels for 3390 (10 sheets à 132 labels)
Detector mounting holes, 2x(4x7 mm) c/c = 70 mm. E+/E- = Ext. LED. A/B = zone line in/out
(or end-of-line device). Connectors for wire diameter 0.6 - 1.2 mm (approx. 0.3 - 1.13 mm
2 ).
Connection box mounting holes, 2x(5 mm) c/c = 108 mm. The connection box is prepared for
required number of compression glands, one, two or three. A gland is approx. 30 mm high.
Technical data
Voltage (V DC)
rated
allowed
normal
24
12-30
24 (zone line voltage)
Current consumption at nom.
voltage, quiescent (mA)
0
Current limitation required, when
active (mA)
(EBL equipment has current limitation.)
6295-6297: Must be min. 6 and max. 40
6298: Must be min. 6 and max. 30
Ext. LED output
voltage (V)
current output (mA)
Zone line voltage minus 2 V
Max. 10 (no internal current limiter)
Alarm resistance (Ω) For 6295-6297: approx. 400. For 6298: approx. 680
Internal capacitance (nF)
Internal inductance For 6295-6296: max. 50
For 6295-6296: 0
Ambient temperature ( °C)
operating
(Min. / Typical / Max.)
storage 6295 (A2 S): 6296 (B S): 6297 (C S): 6298 (E S):
-40 /+25 /+50 -40 /+40 /+65 -40 /+55 /+80 -40 /+85 /+110
-45 to +70 -45 to +70 -45 to +70 -45 to +70
Ingress Protection rating IP67 (attached conn. box, silicon gasket and compression glands required)
Static response temperature 57, 72, 87, or 117 °C depending on detector / class. See text.
Size ∅ x h (mm) Detector: 95 x 42 Connection box: 100 x 35
Detector + Connection box: 100 x 75 (excl. compression glands)
Weight (g) Detector: 82 Connection box (incl. 3 glands): 134
Construction
Colour Body (6295, 6296): ABS
Body (6297, 6298): Modified Polycarbonate.
Protector (on the body) & Connection box: Modified Polycarbonate.
Grey (N8, Munsell colour code)
Approvals 05 EC Certificate no. 0845-CPD-232.1192 (6295); EN54-5
05 EC Certificate no. 0845-CPD-232.1193 (6296); EN54-5
05 EC Certificate no. 0845-CPD-232.1194 (6297); EN54-5
05 EC Certificate no. 0845-CPD-232.1195 (6298); EN54-5
ATEX classification (for 6295 &
6296 only)
6295: II 3GD EEx nA II T5 (T100°C), -40°C ≤ T
a
≤ 50°C
6296: II 3GD EEx nA II T5 (T100°C), -40°C ≤ T
a
≤ 65°C