Resolution & preset modes – Philips 150P2E User Manual
Page 7

VIDEO
• Video dot rate
80 MHz
• Input impedance
- Video
75 ohm
- Sync
2 kOhm
• Input signal levels
700m Vpp
• Sync input signal
Separate sync
Composite sync
Sync on Green
• Sync polarities
Positive and negative
• Input
Frequency
XGA Hsync 48- 61 KHz, Vsync 60 - 76 Hz (N.I.)
SVGA Hsync 35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
VGA Hsync 31- 38 KHz, Vsync 60 - 76 Hz (N.I.)
• Video interface
Dual input: Both Analog (D-Sub) and DVI-D (Digital only) are
available It can be switching via OSD selection.
OPTICAL CHARACTERISTICS
• Contrast ratio
300 (typ.)
• Brightness
250 cd/m
2
(typ.)
• Peak contrast angle
6 o'clock
• White Chromacity
x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)
• Viewing Angle (C/R >5)
Upper >55° (typ.)
Lower >60° (typ.)
Left >75 ° (typ.)
Right >75 ° (typ.)
• Response time
<=45ms (typ.)
* These information are subject to change without notice.
Resolution & Preset Modes
• Maximum
1024 x 768 at 75Hz
150P2E/150P2D Product Information
file:///D|/Grace/150P2/english/150p2e/product/product.htm (2 of 8) [9/5/2001 11:06:13 AM]