Pass Labs X150.5 User Manual
Page 9
9
X150.5 Owners Manual
All figures obtained after 1 hour warmup, with regulated 120 VAC
power line. See manual notes about AC power line regulation.
Gain
30 dB
Freq. Response
-3 dB at 1Hz, -3 dB at 100 kHz
Power Output
150 watts maximum @ 1% THD,
1 kHz, 8 ohms
Maximum Output Voltage
plus, minus 50 volts
Maximum Output Current
plus, minus 20 amps
Input Impedance
22 kohm balanced
Damping factor
250 ref 8 ohms nominal
Slew rate
plus, minus 50 V/uS
Output Noise
300 uV unweighted 20-20 kHz
Balanced CMRR
-60 dB @ 1 kHz (input common
mode rejection ratio)
DC offset
< 100 mv differential
Power Consumption
250 watts idle, 600 watts maximum
Temperature
25 degrees C. above ambient at idle
Dimensions
19 “ W x 22” D x 7.5” H
Shipping Weight
68 lbs.
For more information please contact:
Pass Laboratories Inc.
P.O. Box 219,
24449 Foresthill Rd.,
Foresthill, CA 95631
Tel: 530.367.3690
Fax: 530.369.2193
www.passlabs.com
© 2006, Pass Laboratories Inc.
X150.5 Specifications
“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”,
“Aleph”, and “Zen” and are all registered trademarks of Pass
Laboratories, Inc., and all rights thereto are protected by law.