Panasonic BT-LH2550P - Manual (Page 23)

23
Main Menu
(continued)
*5 Remote control via RS-232C ends in error (error response: ER001) when “GPI PRESET1” or “GPI PRESET2”
is selected with the GPI function.
*6 Display size for SD signals differ.
TYPE1: The effective horizontal area meets the SMPTE125M for NTSC and ITU-R BT 601-5 for PAL.
TYPE2: The effective horizontal area meets the EIA-RS170 for NTSC and ITU-R BT 470-4 for PAL.
Sub menu Setting Description
GPI PRESET1
*5 4:3
13:9
14:9
CNSCO
VISTA
95% (16:9)
93% (16:9)
90% (16:9)
88% (16:9)
80% (16:9)
USER (16:9)
95% (4:3)
93% (4:3)
90% (4:3)
88% (4:3)
80% (4:3)
USER (4:3) GPI PRESET1: Selects the marker displayed by the GPI terminal
“MARKER1 ON/OFF” (
page 48) operation.
GPI PRESET2: Selects the marker displayed by the GPI terminal
“MARKER2 ON/OFF” (
page 48) operation.
<4:3> 4:3 marker
<13:9> 13:9 marker
<14:9> 14:9 marker
CNSCO marker
VISTA marker
<95% (16:9)> 95% area marker for 16:9 aspect ratio
<93% (16:9)> 93% area marker for 16:9 aspect ratio
<90% (16:9)> 90% area marker for 16:9 aspect ratio
<88% (16:9)> 88% area marker for 16:9 aspect ratio
<80% (16:9)> 80% area marker for 16:9 aspect ratio
<95% (4:3)>
95% area marker for 4:3 aspect ratio
<93% (4:3)> 93% area marker for 4:3 aspect ratio
<90% (4:3)> 90% area marker for 4:3 aspect ratio
<88% (4:3)> 88% area marker for 4:3 aspect ratio
<80% (4:3)> 80% area marker for 4:3 aspect ratio
This area marker can be varied in 1% increments in the
range between 80% to 95%.
The above indicates values when the 16:9 and 4:3 sub
menus are selected.
GPI PRESET2
*5
MARKER TYPE
*4*6 TYPE2
TYPE1 Selects conventional monitor or camera recorder marker size.
Marker size compliant with the camera recorder (Panasonic)
The marker has the same size as that of the previous
model (BT-LH2600W).
CROSS HATCH OFF
LOW
HIGH Turns the cross hatch grid on and off and sets its density.
Turns the display off
20/256 gradations (displays a light cross hatch grid)
70/256 gradations (displays a dense cross hatch grid)