Pioneer DDJ-T1 - Manual (Page 19)

18 19 DRB1536-A
En 19
Part
names
and
functions
3 HEADPHONES VOL control
Adjusts the audio level output from the [PHONES] terminal.
4 GAIN control
Adjusts the sound level input to the various decks.
5 EQ (HI, MID, LOW) controls
These adjust the sound quality input to the various decks.
These adjust the [HI] (high range), [MID] (medium range) and [LOW]
(low range), respectively.
6 Effect assign buttons
Press the [1] or [2] button to assign TRAKTOR effect unit [FX 1] or
[FX 2] to the deck.
7 CUE button
The sound of decks for which the headphones [CUE] button is
pressed can be monitored over headphones.
When multiple headphones [CUE] buttons are pressed, the sound of
the decks for which the buttons are pressed is mixed and output from
the headphones.
8 SYNC button
The track on the deck for which the [SYNC] button is pressed is
synchronized to the [BPM] and [Beat Grid] of the deck for which the
[MASTER] button is pressed or of the master clock.
9 MASTER button
Sets the tempo of the deck for which the [MASTER] button is pressed
as the master for synchronizing with the beat sync function.
a Channel fader
Adjusts the sound level output from the various decks.
b CH FADER START switch
Switches the [CH FADER START] function on/ off.
When the [CH FADER START] switch is set to [ON], the fader start
and back cue functions can be used according to the movement of
the channel faders.
! Fader start: When the channel fader is moved from the front-
most position towards the back while pausing at the cue point,
playback starts immediately.
! Back cue: When the channel fader is returned from the back to
the front-most position, playback returns to the set cue point,
cues there, and the pause mode is set immediately.
c Crossfader
Switches the sound of the decks assigned to the left and right sides
of the crossfader for output.
The deck assignment can be changed with the [Deck Assign Button]
at the sides of the TRAKTOR crossfader.
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs are not designed to be removed. Pulling the knobs
strongly may result in damaging the unit.
4 Effect
ON OFF
ADVANCED
CHAINED
MIN MAX
DRY/ WET
DECK
FX1
FUNCTION
IN ADJUST OUT ADJUST
MOVE
HOT CUE
IN
AUTO LOOP KEY
LOCK
TEMPO
RANGE
OUT
NEEDLE SEARCH
MODE SIZE BWD FWD
DELETE 1
ACTIVE
FILTER
A
C
SELECT/ BACK
1
1
2
2
3
3
MIN MAX MIN MAX MIN
LOW HI
MAX MIN
VOL
MAIN
BROWSE VIEW
HEADPHONES
MASTER CUE
MIX
MAX MIN
VOL
MAX
5
2
6
3
7
4
8
GAIN
MIN MAX
C
LOAD
FX 1 2
EQ
HI
MIN MAX
MID
MIN MAX
LOW
MIN MAX
GAIN
MIN MAX
TREE FAVORITES
A
LOAD
FX 1 2
EQ
HI
MIN MAX
MID
MIN MAX
LOW
MIN MAX
GAIN
MIN MAX
B
LOAD
PUSH
FX 1 2
EQ
HI
MIN MAX
MID
MIN MAX
LOW
MIN MAX
EQ
HI
MIN MAX
MID
MIN MAX
LOW
MIN MAX
GAIN
MIN MAX
D
LOAD
FX 1 2
REC
5
5 4 3
4 3 2 1
! The [Advanced] mode cannot be selected with TRAKTOR Pioneer DDJ-T1 EDITION.
! The effect panel can be switched to the [Advanced] mode when you upgrade to TRAKTOR PRO or TRAKTOR SCRATCH PRO.
1 ADVANCED/ CHAINED selector button
! [Chained] mode: Up to 3 effects can be selected on the effect
panels and operated simultaneously.
! [Advanced] mode: The parameters of the one selected effect
can be adjusted in detail.
2 Effect button
This button is exclusively for use in the [Advanced] mode.
3 DRY/WET control
Changes the balance between the effect sound and original sound.
4 SELECT/BACK button
The effect type switches each time the button is pressed.
With TRAKTOR Pioneer DDJ-T1 EDITION, the 6 types of effects below
can be used.
no Effect Flanger Delay Reverb Beatmasher2 Gater
— When the [SELECT/BACK] button is pressed while pressing the
[SHIFT] button, the direction in which the effect types switch is
reversed.
— When in the [Advanced] mode, the effect type is switched by
pressing the [1] button for [SELECT/BACK].
5 Effect control
! Effect control dials
The linked functions differ depending on the TRAKTOR effect
panel’s mode.
— [Chained] mode: Adjusts the balance between the effect
sound of the each effects and the original sound.
— [Advanced] mode: Adjusts the various parameters of the
selected effect.
! Effect control buttons
The linked functions differ depending on the TRAKTOR effect
panel’s mode.
— [Chained] mode: Switches the various effects on/ off.
— [Advanced] mode: When the effect control [1] button is
pressed, all the effect setting values return to the default
setting values.
When effect control buttons [2] and [3] are pressed, the
various parameters switch between on and off. The types of
parameters differ according to the effect.