Pentair PS4 - Manual (Page 20)

Page 20
4.1.2 Set the Time Menu
To set the time, highlight the MENU and press
SELECT. Highlight SET TIME and press SELECT
(see Figure 24). Use the UP or DOWN button to set
the values. Press SELECT to continue.
Pool/Spa Only - Highlight MENU and press
SELECT. Highlight SET TEMP and press SELECT
(see Figure 26). The message TEMP1 must be
higher than TEMP2 is displayed. Highlight TEMP1
and press SELECT. Use the UP or DOWN button
to increase or decrease the temperature and press
SELECT. Highlight TEMP2 and press SELECT.
Use the UP or DOWN button to increase or
decrease the temperature and press SELECT. Use
the BACK button to return to the main screen.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
Figure 24. Set Time Menu
4.1.3 Set the Temperature Menu
Pool/Spa Combination - Highlight MENU and
press SELECT. Highlight SET TEMP and press
SELECT (see Figure 25). Use the UP or DOWN
button to highlight either POOL or SPA and press
SELECT. Use the UP or DOWN button to increase
or decrease the tem per a ture and press SELECT.
Use the BACK button to return to the main screen.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
SET TEMP
POOL HEAT 80°F
SPA HEAT 104°F
Highlight an
item and press
SELECT
SET TEMP
POOL HEAT 80°F
SPA HEAT 104°F
Highlight an
item and press
SELECT
SET TEMP
POOL HEAT 85°F
SPA HEAT 104°F
Highlight an
item and press
SELECT
Figure 25. Set Temperature Menu - Pool/Spa
Combination
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
SET TEMP
TEMP1 80°F
TEMP2 60°F
Highlight an
item and press
SELECT
SET TEMP
TEMP1 80°F
TEMP2 60°F
Highlight an
item and press
SELECT
SET TEMP
TEMP1 85°F
TEMP2 60°F
Highlight an
item and press
SELECT
Figure 26. Set Temperature Menu - Pool/Spa Only
4.1.4 Label Auxiliary Functions Menu
Highlight MENU and press SELECT. Highlight
SYS TEM SETUP and press SELECT (see
Figure 27). Highlight LABEL AUX and press
SELECT. High light the AUX you want to label
and press SELECT. Highlight GENERAL, LIGHT,
WA TER FALL or CUSTOM LABEL and press
SELECT. Choose a name within these categories
by using the UP or DOWN button. Press SELECT
when you find the correct label. Choose CUS TOM
to type in your own labels.
NOTE The Auxiliary labels AIR BLOWER and FILL
LINE have an automatic 30 minute runtime.
If DIP switch 1,2 or 3 are on, auxiliaries 1, 2
and 3 are labeled CLEANER, LOW SPEED
and SP ILL OVER respectively and cannot be
re la beled.