Pioneer DVH-3950MP - Manual (Page 48)

Troubleshooting
Symptom Cause Action
Power doesn
’t turn on.
The unit doesn
’t operate.
Leads and connectors are not prop-
erly connected. Confirm once more that all connections are
correct.
The fuse is blown. Rectify the problem that caused the fuse to
blow, and then replace it. Be very sure to in-
stall the correct fuse with the same rate.
Noise and other factors are causing
the built-in microprocessor to oper-
ate incorrectly. Turn the unit off and then on.
The unit does not operate cor-
rectly even when the appropriate
remote control buttons are
pressed. Battery power is low. Load new battery.
Some operations with certain discs
are prohibited. Check with another disc.
Playback is not possible. The disc is dirty. Clean disc.
The loaded disc is of a type this unit
cannot play. Check what type the disc.
No sound is heard.
The volume level will not rise. Cables are not connected correctly. Connect the cables correctly.
The icon is displayed, and op-
eration is not possible.
The operation is prohibited for the
disc. This operation is not possible.
The operation is not compatible
with the disc
’s organization.
This operation is not possible.
The picture stops (pauses) and
the unit cannot be operated. Reading of data has become impos-
sible during playback. After pressing g once, start playback once
more.
There
’s no sound.
The volume level is low. Adjust the volume.
There
’s audio and video skip-
ping.
This unit is not firmly secured. Secure this unit firmly.
The picture is stretched, the as-
pect is incorrect. The aspect setting is incorrect for
the display. Select the appropriate setting for your dis-
play.
Additional Information
En
48
Appendix