Profile California 400SX - Manual (Page 11)

CH1 CH2
CH3 CH4
Fuse
CH3 CH4
Bridged
CH1 CH2
Bridged
Speaker
Output
REM GND B+
REM GND B+
Fuse Bridged
Speaker
Output
R L
4 Ohm Speaker 4 Ohm Speaker
TWO CHANNEL BRIDGED SPEAKER CONNECTIONS
FOUR CHANNEL BRIDGED SPEAKER CONNECTIONS
S
PEAKER CONNECTIONS (BRIDGED)
The California amplifiers are capable of being bridged in a mono configuration. This feature
allows you the flexibility of using the amplifier to drive a ** subwoofer or a center channel. In
this configuration the amplifier sums the right and left channel to deliver one channel (mono)
output.
Please note: in order for the amplifier to sum right and left signal information, both right and
left RCA connections must be made.
**CAUTION! In the bridged mode, the amplifier must see a 4 Ohm load or higher. Any
lower than 4 Ohms will cause the amplifier to overheat and possibly cause permanent
damage to the amplifier!
10
+ + - -
4 Ohm Speaker 4 Ohm Speaker 4 Ohm Speaker 4 Ohm Speaker
+ + - - + + - -