Philips 6709X User Manual
Page 9
9.
ENGLISH
INSERTING THE FIRST CARTRIDGE
1
Take one lotion or gel cartridge.Take the connector
supplied and remove it from the little bag. Push it into
the plastic cap of cartridge until it locks into position
with a click.
2
Push the release slide on the back of razor downwards
and open the cover of the cartridge compartment.
3
Slide the cartridge with the connector in place into the
razor. It only fits properly if the white side of the
connector is pointing upwards. Close the cover.
4
Press the applicator button a few times until the Nivea
for Men shaving lotion or gel appears.The razor is now
ready for use.
REPLACING CARTRIDGES
1
Open back cover of razor.
2
Remove empty cartridge, pull out and save the
connector. DO NOT discard the connector.
3
Rinse out cartridge compartment with water before
replacing cartridge. Air dry thoroughly.