Philips DVD710 - Manual (Page 15)

• To repeat the entire disc, press REPEAT a second time for
about 1 second;
➜
REPEAT appears on the display.
• To exit Repeat mode, press REPEAT a third time for about 1
second.
A-B REPEAT
To repeat or loop a sequence:
• Press A-B REPEAT briefly at your chosen starting point;
➜
A appears on the player display.
• Press A-B REPEAT briefly again at your chosen end point;
➜
A - B appears on the display, and the repeat sequence
begins.
• To exit the sequence, press A-B REPEAT briefly again.
SCAN
Plays the first 10 seconds of each title on the disc.
• Press SCAN for about 1 second.
• To continue play at your chosen title, press SCAN again for
about 1 second or press 2.
FTS (FAVOURITE TRACK SELECTION)
NOTE
- FTS Favourite Track Selections are compiled and played
using the OSD: ensure that the TV is on.
Playing an FTS program
If Auto FTS is set to on, play of the FTS program starts imme-
diately. If Auto FTS is off:
1 Insert a disc and go to Stop mode.
2 Press
l
or
r
to start compiling FTS programs.
3 If available the excisting FTS program appears
4 Follow instructions under “To exclude tracks” or “To select
tracks”.
To turn Auto FTS on and off, see Settings, p. 20
Compiling an FTS program
FTS programs can be compiled by selecting the tracks you
want to play (“Track Selection”) or by excluding the tracks you
don’t want to play (“Excluding Tracks”)
To exclude Tracks:
1 Insert a disc and go to Stop mode.
2 Press
l
3 Use
l
or
r
to move to the first track number you want to
exclude.
4 Press
o
.
5 Repeat steps 3 and 4 to exclude further track numbers in
the same way. If you change your mind, you can re-include
any track number by moving back to it and pressing
b
6 To clear your whole selection and start again, press
9.
audio CD exclude tracks
1 2 3 4 8 7 6 5 13 12 11 10 9 14 2
play
7
exclude
play selection clear selection 2 9
english
19
PLAYING AN AUDIO CD