Philips CDR 800/17 - Manual

Philips Audio CD Recorder CDR 800: Getting started…
English
IN OUT
L
R
CDR/TAPE AMPLIFIER/
RECEIVER
OUT
DIGITAL DIGITAL COAXIAL SOURCE
(CD player, DVD, DAT)
IN
L
R
ANALOG
CD RECORDER
OUT
L
R
PHONO
RECORD PLAYER
OUT
L
R
ANALOG
OPTICAL
IN
IN OUT
DIGITAL
IN OUT
L
R
ANALOG
IN
L
R
PHONO
AC MAINS
Demo mode
The demo mode displays various features of the set and will start automatically.
0
To switch off the demo mode keep STOP
9
pressed for at least 5 seconds.
➜ The demo mode is cancelled permanently.
General information
This Quick Installation Card gives a rough
overview and helps to quickly start with basic
steps. Please read the supplied instruction
manual for detailed information.
Power
1 Check whether the power voltage as shown on the
type plate corresponds to your local power voltage. If
it does not consult your dealer or service
organization.
2 After all connections have been made connect
the power cord to AC MAINS ~ and to the wall
outlet.This switches on the AC power supply.
To disconnect the set from the power
completely, remove the power plug from the wall
outlet.
Discs for recording
Use discs with the “Digital Audio” logo only:
– CD-Audio Recordable (CDR) discs, or
– CD-Audio ReWriteable (CDRW) discs.
Do not use computer CDR(W)s as
recording would not work properly.
Discs for playback
Note: MP3 playback works only if the filenames end
with “.mp3”.
ReWritable
playback standard CDRW Philips
in: CD player compatible CDR 800
disc: CD player
finalized CDR ● ● ●
finalized CDRW ● ●
unfinalized CDR ●
or CDRW CD Recorder only
MP3 CD ●
xp QRC CDR 800/17 eng.1 02-08-2001 12:55 Pagina 1