Palsonic 6140G User Manual
Page 24
.
.
.
.
.
.
.
.
.
.
.
.
OTHERS
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to
the trouble you are experiencing.
Spots appear on the screen
Stripes appear on the screen
Double images or "ghosts"
Snowy picture
The remote controller does not work
TV cabinet creaks
Specifications
Power supply:
Power consumption:
Dimensions (mm):
Weight (kg):
CRT
TV system & channel range
System
PAL-B/G
VHF
2-12
UHF
21-69
Be sure the power cord is plugged in.
Contrast, colour, tint are not correctly adjusted
Possible interferences of automobiles, motorcycle,
trolley bus, neon lamps, etc.
Possible interference of electronic
interference from another TV set, a
computer, an electronics game machine, a
broadcast station, etc.
This may be caused by reflections from
nearby mountains or buildings.
Check the antenna direction.
It is possible that the aerial "lead-in" is
damaged or comes off.
Check the antenna direction
The batteries may be worn out.
The batteries may be installed with their
polarity reversed.
Even if the picture or the sound is normal, changes
in the room temperature sometimes make the TV cabinet
expand or contract, making a noise. This does not
indicate a malfunction.
AC 240V, 50Hz
120W
684 (W) x 510 (H) x 526 (D)
35
61 cm
CATV
X~Z+2, S1~S41
Colour system:
Sound output:
Accessory:
* Note: Design and specifications are subject to change without notice.
PAL-BG, NTSC 3.58/4.43 (AV)
5W + 5W
one remote controller
Poor colour, poor tint
No power, red indicator is not lit up
Symptoms
Check the following items
22
Unevenness in colour in some parts of
the screen.
When the set is switched on, do not shift or move the set
around. Sometimes it may develop an unevenness in
colour in some parts of the screen. this can be eliminated
by switching the set off with the POWER switch and wait
for 10 minutes before switching on again.
.