Peavey 23XO - Manual (Page 14)

14 14
PV
®
23XO
2-Way Stereo/3-Way Mono
SPECIFICATIONS
CONTROLS AND SWITCHES
Channel Gain Control:
0 to +12 dB
Low Frequency Level Control: -∞ to +6 dB
High Frequency Level Control:
-∞ to +6 dB
Low Frequency to High Frequency crossover: 100 Hz to 1 Khz x10 range: Changes Low Frequency
to Mid Frequency from (100 Hz to 1 kHz) to
(1kHz to 10 kHz)
2-way stereo/3-way mono changes the unit from
2-way stereo or 3-way mono
FREQUENCY RESPONSE
Each output is -3 dB at the selected crossover frequency value. Outputs are essentially flat within their
relative passbands.
Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz
Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB; 22 Hz to 22 kHz, unweighted gain @
0dB(ref +4dBu) - 90dB
Low Frequency Output: -86 dBu below 80 dB
High Frequency Output: -84 dBu below -78 dB
Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0 dB) +22 dBu
Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced
Input Impedance: 10 k ohms unbalanced
CONNECTORS
Inputs:
XLR Balanced
Outputs: XLR Balanced
Power Requirements: 120V AC, 50/60 Hz, 20 watts (domestic model)