Panasonic EY7460 - Manual (Page 13)

- 13 -
VII. MAINTENANCE
Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine,
or other volatile solvents for cleaning.
VIII. ACCESSORIES
Use only bits suitable for size of drill's chuck.
IX. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES MAXIMUM RECOMMENDED CAPACITIES
Model EY7460 EY7960
Screw
driving
Machine screw M8
Wood screw ø 10 mm (3/8")
Self-drilling screw ø 6 mm (15/64")
Drilling
For Wood ø 38 mm (1-1/2")
For Metal ø 13 mm (1/2")
For Masonry --- 13 mm (1/2")
X. SPECIFICATIONS
MAIN UNIT
Model EY7460 EY7960
Motor voltage 21.6 V DC
No load speed
Low 100 - 400 min -1 (rpm)
High 350 - 1500 min -1 (rpm)
Blows Rate Per Minute
Low --- 1800 - 7200 min -1 (bpm)
High --- 6300 - 27000 min -1 (bpm)
Chuck capacity ø 1.5 mm - ø 13 mm (1/16" - 1/2")
Clutch torque
Approx. 1.0 N•m (10 k f-cm, 8.8 in-lbs) –
6.9 N•m (70 k f-cm, 61 in-lbs)
Overall length 232 mm (9-1/8") 245 mm (9-5/8")
Weight (with battery pack: EY9L60) 2.45 k (5.39 lbs) 2.55 k (5.61 lbs)
BATTERY PACK
Model EY9L60
Storage battery Li-ion Battery
Battery voltage 21.6 V DC (3.6 V x 6 cells)
Capacity 3 Ah
BATTERY CHARGER
Model EY0L80
Rating See the rating plate on the bottom of the charger.
Weight 0.95 k (2.1 lbs)