Porter-Cable A02871-043-0 - Manual (Page 10)

10- ENG A02871
1. With the help of another person, tilt the generator
and rest on frame as shown. DO NOT remove the
shipping block until portability kit has been
assembled.
The generator is too heavy to be
lifted by one person. Obtain
assistance from others before lifting.
2. Assemble wheels to wheel brackets using shoulder
bolts (11) and locknuts (12). NOTE: Valve stem
should be to the outside. Tighten securely.
3. Attach rubber bumper (4) to foot bracket (3) using
screw (13) and keps nut (14). Tighten securely.
4. Remove the ground lug. Save grounding lug, screw,
and flange nut to assemble foot bracket.
5. Attach foot bracket assembly (3) and ground lug to
generator frame as shown. Tighten screws securely.
NOTE: Make sure grounding lug is oriented as
shown.
6. To make installation easier, submerge handle grips into warm soapy water.
Remove handle grips from soapy water and slide onto handles .
7. Squeeze snap button (9), slide into handle, and
release snap button through second hole.
NOTE: V of snap button is inserted first. Repeat
step on other handle.
8. Depress snap button (9), slide into handle
bracket, and release through first slot in handle bracket as shown. Secure
handle to handle bracket with screw (7) and flange nut (8).
9
1 11 1
v va allv ve e s stte em m
g grro ou un nd diin ng g llu ug g
s sh hiip pp piin ng g b bllo oc ck k
1 10 0
8 8
3 3
4 4
g grro ou un nd diin ng g llu ug g