ProForm PFEL54932 - Manual (Page 20)

20
Inspect and tighten all parts of the elliptical crosstrainer
regularly. Replace any worn parts immediately.
For smooth opera-
tion of the elliptical
crosstrainer, clean
the ramp regularly
using a soft cloth
and a small amount
of mild detergent.
Other parts of the
elliptical crosstrainer
can be cleaned in
the same way. Keep
liquids away from the console. Never use abra-
sives or solvents.
HOW TO MOVE THE ELLIPTICAL CROSSTRAINER
Stand in front of
the elliptical
crosstrainer,
hold the handle-
bars firmly, and
place one foot
against the ramp
in the location
shown. Pull the
handlebars until
the elliptical
crosstrainer can
be moved on the
front wheels,
and carefully
move the ellipti-
cal crosstrainer
to the desired
location. Then,
place one foot against the ramp and lower the ellipti-
cal crosstrainer. Due to the size and weight of the
elliptical crosstrainer, use extreme caution while
moving and lowering it.
HOW TO LEVEL THE ELLIPTICAL CROSSTRAINER
After the elliptical
crosstrainer has
been moved, make
sure that the ends
of both stabilizers
are touching the
floor. If the elliptical
crosstrainer rocks
slightly during use,
turn one or both of
the leveling feet
under the front stabilizer until the rocking motion is
eliminated.
HANDGRIP PULSE SENSOR TROUBLESHOOTING
If there are sheets of clear plastic on the metal con-
tacts on the handgrip pulse sensor, peel off the plas-
tic. For optimal performance of the handgrip pulse
sensor, keep the metal contacts clean using a soft
cloth and a small amount of mild detergent. Never
use alcohol, abrasives, or chemicals.
Avoid moving your hands or squeezing the handgrip
pulse sensor too tightly. Excessive movement or pres-
sure may interfere with heart rate readings. For the
most accurate heart rate reading, hold the metal con-
tacts for about 30 seconds.
MAINTENANCE AND TROUBLESHOOTING
Leveling Foot
Ramp
Place your
foot here
Wheel