2 physical installation – Planet Technology DTR-100DB User Manual
Page 4
3.2 Physical Installation
This chapter explains how to install DTR-100DB with your
computer or notebook.
1. Connecting USB Port
Connect USB connector of the DTR-100DB to the USB port on
your computer or notebook.
2. Connecting Terrestrial Antenna
Connect the supplied ISDB-T antenna to the VHF/UHF port on
the backside of the DTR-100DB.
3. Install Device Driver & Utility
(1) After installing the DTR-100DB into your computer or note-
book, the system will find a new hardware device as the
below figure “Found New Hardware Wizard” will appear.
Please click “Cancel” to exit the Wizard.
Page 4