PeerCall USB Adaptor - Manual (Page 4)

User’s Manual ---- PeerCall
TM USB Adapter
PeerCall International Inc.
CHAPTER 2
How to use the PeerCall USB Adaptor
2.1 Connect USB Adaptor to PC
Connect USB Adaptor to PC, POWER indicator will be on.
Connect telephone line from the wall outlet to "LINE" port.
Connect Phone set to "TEL ” port.
2.2 Run PeerCall WIN
PeerCall WIN shows a dialog indicate device is connected successfully.
2.3 Channels Switch
You can press
“*” to switch PSTN channel to USB channel or switch USB channel to
PSTN channel.
2.4 Make calls through USB
Input number and call out:
Press “*” to change to USB channel, the "USB" indicator is on. Press PeerCall
number on the phone keypad, this number will be shown on PeerCall WIN
window, then press “#” to call out. When you hang-up, the USB Adaptor switch
to PSTN channel automatically.
2.5 Make calls through PSTN (Phone to Phone)
Press the regular phone number, then press “#” to call out.
For example: to call 800-123-4567
Operation: Input the number 8001234567, then press “#” to call out.
2.6 Answer a call
When a call (can be either PeerCall or PSTN) comes in, the phone is ringing, pick up
handset or press handfree key to answer the call.
2.7 Adjust options (default channel)
Set the default channel and sound card settings in the
“Options”, as shown: