Philips DC570/37B - Manual (Page 11)

English
11
Preparations
Connecting a USB device
By connecting a USB mass storage device
(including USB flash memory, USB flash players)
to the system, you can enjoy the device's stored
music through the powerful speakers of system.
Insert the USB device's USB plug into the
socket on the set.
OR
for devices with USB cables:
1 Insert one plug of the USB cable (not supplied)
to the
socket on the set.
2 Insert the other plug of the USB cable to the
USB port of the USB device.
Connecting other equipment to your
system
Use a line-in-cable to connect AUX IN to the
analogue audio out terminals of an external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder).
Before using the remote control
1 Pull out the plastic protective sheet.
2 Select the source you wish to control by
pressing one of the source select keys on the
remote control (for example USB, TUNER).
3 Then select the desired function (for example
…
≈ ).
Replacing the remote control
battery (lithium CR2025)
1 Press the slot on the battery compartment.
2 Pull out the battery compartment.
3 Replace a new battery and fully insert the
battery compartment back to the original
position.
1
2
3
CR2025
CAUTION!
– Remove battery if it is exhausted or will
not be used for a long time.
– Batteries contain chemical substances, so
they should be disposed of properly.
– Perchlorate Material-special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
pg1-24-DC570_37_Eng 2008.3.20, 16:53 11