ProForm Crosswalk DTL32941 User Manual

Page 9

9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the

walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.

8. Attach a Wheel (66) to the inner side of each Extension

Leg (63) with a Wheel Bolt (64) and a Wheel Nut (32) as

shown. Do not overtighten the Wheel Bolt. The Wheel

should be able to spin freely.

Lift the treadmill frame (see HOW TO FOLD THE

TREADMILL FOR STORAGE on page 11), but do not

latch it. Make sure that the frame is centered between

the Handrails (not shown). Firmly tighten the 3/4” Bolts

(not shown) used in assembly step 4. Then, lower the

frame to the floor.