Panasonic EYFLA2A User Manual

Page 10

- 10 -

) Other

• Bit and socket condition: Material,

amount of play, etc.

• Use of a universal joint or socket

adapter

• User: Manner in which the tool is

applied to the bolt, strength with which
the tool is held, manner in which the
tool’s switch is engaged

• Condition of object being tightened: Ma-

terial, seating surface finish

Setting the tool to configuration mode
1. Turn off the control panel.

• If the control panel is on, remove and

then reinsert the battery pack.

. Engage the switch while pushing the

button and then release both the

but-

ton and the switch.

• After all the LED lamps have turned off,

the control panel will flash and change
to configuration mode.

NOTE:

• Tools ship from the factory set to “F”

mode (torque control function off).

• The control panel will turn off if the tool

is not operated for a period of 5 min-
utes.

Configuring the torque clutch setting

(1)

()

Display

Battery indication lamp

1. Press the

and

buttons to select the

clutch setting that is appropriate for the
work being performed.

…

As the

button

is pressed

As the

button

is pressed

• “F” indicates that the torque control func-

tion is off.

This manual is related to the following products: