Poulan QCT38-97 - Manual (Page 5)

5
02
6
4
5
02643
BAGGER SUPPORT ASSEMBLY
(See Fig. 1A)
1. Your tractor already has four (4) shoulder bolts installed
on the rear drawbar, simply hang the support assembly
on the bolts.
1
PULL OUT ON STOP BRACKET TO
REMOVE SUPPORT ASSEMBLY
TO REMOVE THE SUPPORT ASSEMBLY (See
Fig. 2)
1. Pull outward on the stop bracket enough to allow support
assembly to be lifted up and away from drawbar.
SHOULDER
BOLTS
FIG. 1A
2
FIG. 2
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY (See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
as sis tance of another person for mounting cover assembly
to tractor.
1. Position cover assembly on ground behind tractor as
shown.
2. Lift and rotate cover to align cover bracket with support
assembly.
3. Slide cover assembly down onto the support
assembly.
02646
COVER
ASSEMBLY
SUPPORT
ASSEMBLY
SUPPORT
ASSEMBLY
ASSEMBLY
FIG. 1B