Plantronics 995 - Manual (Page 8)

4
Pairing Your Headset
How to Manually Pair Your Headset and
Adapter
Your headset and adapter are factory pre-paired,
and should automatically connect with each
other. Should your headset and adapter become
unpaired, you can initiate pairing manually:
1
Press and hold the Power and Connect
buttons on the headset and adapter for 4
seconds.
The status lights on the headset and adapter
will rapidly flash blue.
2
The headset and adapter will automatically
attempt to pair.
If the pairing is successful the status lights will
glow solid blue; if unsuccessful, both headset
and adapter will stay in pairing mode.
If manual pairing was unsuccessful, and you want
to re-attempt the pairing process, you must first
take your headset and adapter out of pairing
mode.
3
Turn headset off
4
Single press the Connect/Pair button on
the adapter, then repeat steps 1 and 2.
Note If your headset and adapter are separated
and lose their connection after being successfully
paired, they will automatically reconnect when
they come back into range of each other. If they
remain out of range for more than 30 seconds, the
headset will go into sleep mode, but will reconnect
automatically with the adapter once it is back in
range. If the headset is out of range for more than
15 minutes, it automatically shuts off.